Today I will review Rincoe Manto & Metis Mesh Tank Starter Kit, so let’s open it up in smooth inside the box mod we’ll go over that shortly underneath you’re going to have the Metis tank micro USB for charging and firmware upgrading and instead of an extra glass you get some peripherals that have a 5-10 adapter and some extra O rings which keep in mind our silicone there are no extra coils anywhere in this and there is no glass so what you see is what you get hopefully on the retail version there is going to be an extra glass an extra coil inside.
I’m assuming because this is a sample that it doesn’t include that quality certificate QA pass a Met is user manual it is a sub-ohm tank so there’s not much to go over with this, of course, I’m going to show you how to break it in environment I’m sure you guys have noticed but I’ve been doing a lot of reviews on sub-ohm tank just because there are people out there that don’t want to do or buildable x’ and they want to get that same type of flavor and this is kind of the closest you’re going to get okay then you have a little fold-out manual for the mod then we have a Rincoe after-sales service and warranty card.
I can’t speak too much in regards to their warranty just because I don’t know a lot about the company however it’s nice that they have this inside I hope it’s not one of those companies that are telling you that they have a warranty but something goes bad they just don’t cover it I’m not quite sure if that’s the situation at all and then, of course, a battery safety warning card I’m very happy that companies are including this just because if your battery looks like any of these there should be no reason while we’re using those always rewrap.
If you don’t have the means of rewrapping a battery you could buy PVC heat shrink tubing and be able to do this with all of your batteries please for the safety of yourself and others do not use that look like this is the sub-ohm tank not bad-looking at all that’s kind of a cool shape to a nice drip tip the machining on this is well done.
Let’s zoom in let’s going over it on the top you have an 810 drip tip which conveniently enough not only does it have an O-ring into the top cap to grip the drip tip there’s also an O-ring on the inside never really seen that before the double O-ring and then to fill up the tank you’re just going to unthread this part off right here.
Make sure you grip this and not the little metal part if you grip the metal part I should do this you’re going to unscrew the whole tank a lot of threading here and then that is the inside of the top cap can’t say I’ve ever seen machining like that on a Chinese sub-ohm tank where it has the cuts into the threads like that I never understood why they do that and then there’s your silicone O-ring I got to stop this and then on the bottom for your airflow locks in place on the bottom of the sub-ohm tank designed by Rinku so as always let’s see if a baby beast coil works that are always something.
I like to compare and of course, the baby beast threads in and sure enough you are going to go so if you buy this sub-ohm tank and you don’t like the koalas that it comes with you’re always able to upgrade or change it over to a baby beast coil very nice and then the coil that comes with it Rincoe0.15 40 to 80watts medicine mesh coil a lot of people are doing this whole mesh situation a lot see you would kind of pickles you own pickle pennies.
If this is your first starter kit or sub-ohm tank what you’re going to want to do is grab your juice and just saturate that up a little but try not to go too crazy just because if you put too much juice on that coil and that cotton what’s going to happen is it’s going to go down and it’s going to leak so just saturated that a little bit just get that ready to go and then we’re going to leave the rest of this back on as that sits and saturates unscrew the top so we could fill this up really big ports there this is the mod.
It is glass it’s not touchscreen everything you do is with the up and down button down here micro USB there to upgrade the firmware on the side you’re going to have a fire button that kind of looks like a toggle but it doesn’t it just a right thumb fire on the top this is where it shines is it has that Center situation however you can’t fit anything more than a 25 on where you start to put a 26 it goes over the 510 you see it and that is a 25 25 point too close enough it goes right to the edge so 2829 30 s are not going to work on this at all when you have this setting like this it’s not very sturdy just because of the way that the bottom is it’s extremely rounded your battery venting.
On the bottom on a backside of this, you have a pretty cool design pretty cool that you can’t see because this thing is very prone to fingerprints there is a very gnarly design on the inside there. What do you think about this starter kit, let us know in the comment section below!